You can use this project as a fun way to bond with your kids and keep them occupied this summer. Although, we wouldn't blame you for wanting to keep the project to yourself instead. Some of the parts require a 3D printer so if you don't own one, there are ways around it below!

You will need access to a 3d printer if you want to make this project, I highly recommend either shapeways or buying a cheap 3d printer such as the Anet A8

You can download all the 3d printed parts from my thingiverse page here!

Some tools you will need:
1. A Transmitter

2. Wire Strippers

3. A soldering station

4. And a soldering iron with some solder!

For the actual parts you will need:

1. 2 Servos (You will need to modify them to be 360 servos)

2. An All In One FPV Camera

3. A Power Distribution Board

4. A Receiver

5. Two Micro Servos

6. A Lipo Battery

7. A whole bunch of 3d printed parts.

Have you made your own remote-controlled spy rover?

Article and Photo Source: Instructables